Non-woven Abrasive Belt

Non-woven Abrasive Belt

Specification

Material：Non woven, abrasive material
Backing：Polyester cloth
Size: Width 3mm-1400mm, length 150mm-7800mm
Grit: Coarse(P60/P80),Medium(P100/P150),Very Fine(P280/P360)
Color：Brown , red and blue

Features

Suitable for dry and wet grinding
Wide range of applications options
No damage to the workpiece, maintain a cool surface
Long service life

Suitable for

Cleaning, deburring, finishing, coating removal
Used widely in aerospace, plant maintenance, foundry, automotive, metal fabrication and shipbuliding.

LEAVE MESSAGE CHAT ONLINE

 Data download

 Product video

Size		Backing Material	Abrasive Belt Joint	Grit	Color
width/mm	length/mm	Polyester, cotton, Poly-cotton	Butt splice	Coarse	yellow
3~120	305~820			Medium	red
				Fine	blue
				Very fine	grey
Note: Special size and grit available


Very durabl means the nonwoven belt can be used for blending applications. Strongest resin binders for resilient, long life construction

Cleaning, deburring, finishing, coating removal. widely used in aerospace, plant maintenance, foundry, automotive, metal fabrication and shipyards.

Temperature and humidity requirements
The abrasive belt should not be stored in a place where the temperature and humidity change greatly. The ideal temperature is: 18-220C; the ideal humidity is 40-65%. If the temperature is too high, the binder will age and reduce the service life of the belt. Synthetic fiber matrix belts (such as polyester cloth belts) are sensitive to cold and cannot be stored in cold warehouses.
If the humidity is too high or too low, the belt will be deformed, and the deformation will reduce the bond strength of the belt sand layer. In particular, excessive humidity has a serious impact on the abrasive belt. In addition to water-resistant abrasive belts, the general belts are used after being damp, and they are prone to discounts and wrinkles, which cause the belt machine to be scrapped. In addition, the abrasive material is easily adhered to the surface of the abrasive belt when the wet abrasive belt is ground, reducing the service life of the abrasive belt. The high temperature and low humidity have a great influence on the paper-based abrasive belt, which makes the paper-based abrasive belt brittle and easy to break and scrap when used.