Product Name: Sheldahl Brand Sanding Belt Splicing Tape Size: 19mmx100m/ 25mmx100m Available Angle: 55° 67° 75° Color: Red/Blue/White/Yellow Material: Complex Film Application: Sanding Belt Joint Brand: Sheldahl
Coated splicing tapes are produced by applying an exact thickness of dry, thermosetting adhesive to the yarn surface of the tape. The expected results when using this tape are reduced splice thickness, increased joint consistency, reduced labor and a decrease in solvent usage.
For connecting the belt joint.
| Product Name | Sheldahl Brand Sanding Belt Splicing Tape |
| Size | 19mmx100m/ 25mmx100m |
| Available Angle | 55° 67° 75° |
| Color | Red/Blue/White/Yellow |
| Material | Complex Film |
| Application | Sanding Belt Joint |
Reduce the production cost of the belt. Eliminate the process and cost of diamond grinding wheel belt joint;
The belt can run in both positive and negative directions, so that the life of the belt is increased;
Connector for lap, not easy to detach, greatly reduce the accident rate;
Polished and smooth. Especially when grinding composite plate and decorative plate, there is no tremor pattern on the surface;
The appearance of the belt is more beautiful, more professional, more popular with customers!
Second, the pressure Grind and blow clean the belt that has been dried at room temperature for 30 minutes. Attach the tape to the edges of the milled and glue-coated substrate. After hot pressing on the blinding machine, the pre-adhesive tape is pressed on the blinding machine in order to prevent adhesion of the isolating paper.(as shown in figure) Stamping time: 10-15 seconds Temperature: 50 ℃-70 ℃ Pressure: 2000-3000 psi (psi)
ADD:
No. 1003 Building 9, Henan E-commerce Industrial Park, High-tech Zone, Zhongyuan District, Zhengzhou, ChinaTEL/FAX:
+8619937510087WhatsApp:
+8619937510087Email:
info@yihongabrasives.com
Wechat Service