Combined Flap Discs

Size		Backing material	Type	Abrasive	Grit No
100x16	4x5/8	Fiberglass,Plastic	T27,T28, T29	AO/HA,ZA,CER	36-320
115x22	4-1/2 x 7/8	Fiberglass,Plastic	T27,T28, T29	AO/HA,ZA,CER	36-320
125x22	5x7/8	Fiberglass,Plastic	T27,T28, T29	AO/HA,ZA,CER	36-320
150x22	6x7/8	Fiberglass,Plastic	T27,T28, T29	AO/HA,ZA,CER	36-320
180x22	7x7/8	Fiberglass,Plastic	T27,T28, T29	AO/HA,ZA,CER	36-320
230x22	9x7/8	Fiberglass,Plastic	T27,T28, T29	AO/HA,ZA,CER	36-320
Note: High density flaps can be customized.



Excellent performance and efficiency on mild carbon steel and ferrous metal/cast iron applications.


Best used on flat surfaces for blending and smooth finishing Grinding, stock removal, edge deburring/chamfering, weld blending, deflashing &finishing

Don't grind near flammable materials. Grind and sand in well-ventilated areas whenever possible. Wear eye and face protection when working with any abrasive products. Wear a dust mask or approved respiratory protection. Check the packaging for the materials you're abrading or grinding to see which is recommended.
Wear hearing protection. Pay attention to the noise exposure, and make sure you're protected when it exceeds established threshold levels.
Wear safety gloves. Pay attention to where sparks are flying. Direct sparks away from your body and away from anyone else in the room.
Don't wear loose-fitting clothing while grinding. Wear long-sleeved shirts or arm guards and long pants. If the tool you're working with starts to chatter or vibrate, stop at once. Find the cause of the problem, and fix it before you go any further. Use your abrasives on a first-in, first-out basis. Rotate your stock to keep the oldest abrasives ready at hand.

PRODUCT PARAMETERS