Zirconia Aluminium Flap Disc

Size		Backing material	Type	Abrasive	Grit No.
100x16	4x5/8	Fiberglass,Plastic, Iron	T27,T28, T29	ZA	36-320
115x22	4-1/2 x 7/8	Fiberglass,Plastic, Iron	T27,T28, T29	ZA	36-320
125x22	5x7/8	Fiberglass,Plastic, Iron	T27,T28, T29	ZA	36-320
150x22	6x7/8	Fiberglass,Plastic, Iron	T27,T28, T29	ZA	36-320
180x22	7x7/8	Fiberglass,Plastic, Iron	T27,T28, T29	ZA	36-320
230x22	9x7/8	Fiberglass,Plastic, Iron	T27,T28, T29	ZA	36-320
Note: High density flaps can be customized.



Zirconia flap disc are versatile grinding and finishing tool,consisting of three main components: a backing plate,adhesive,and abrasive cloth flaps.The rectangular flaps are overlapped and glued to the backing plate. Flap discs are designed for right angle grinder applications ranging from heavy stock removal to surface blending.


Zirconia flap Disc is consist of a backing plate with pieces of sand cloth flaps. When the flaps wear down,new abrasives is exposed to ensure a constant finishing with its long life.


This product is made of zirconium abrasive cloth, which has strong grinding force, heat resistance and wear resistance, and is not easy to cause discoloration stains on the grinding surface. It has the advantages of good elasticity, safety and low energy consumption. We can customize various specifications for customers.


High-performance zirconia flap disc for maximum stock removal on high carbon steel and stainless steel(INOX).

Don't grind near flammable materials. Grind and sand in well-ventilated areas whenever possible. Wear eye and face protection when working with any abrasive products. Wear a dust mask or approved respiratory protection. Check the packaging for the materials you're abrading or grinding to see which is recommended.
Wear hearing protection. Pay attention to the noise exposure, and make sure you're protected when it exceeds established threshold levels.
Wear safety gloves. Pay attention to where sparks are flying. Direct sparks away from your body and away from anyone else in the room.
Don't wear loose-fitting clothing while grinding. Wear long-sleeved shirts or arm guards and long pants. If the tool you're working with starts to chatter or vibrate, stop at once. Find the cause of the problem, and fix it before you go any further. Use your abrasives on a first-in, first-out basis. Rotate your stock to keep the oldest abrasives ready at hand.