PRODUCT PARAMETERS

PERFORMANCE

• 
  

  Premium materials, high tensile strength, impact resistance is strong

• 
  

  Increasing calcination, polishing speed, high sharpness, grinding effect is good.

• 
  

  Low consumption, not burning, high cost performance, cutting edge

• 
  

  Flaps are firmly locked to prevemt flying pieces

PRODUCT ALBUM

INSTALLATION INSTRUCTIONS

Store flap disc tips:
1.Store abrasive discs at the correct temperature and humidity: 60 to 80° F (15 to 29°C), and 40 to 50% relative humidity.
2.Store coated abrasive discs properly. Keep them at least 4 inches (10+ cm) above the surface of concrete floors. Keep them away from open windows or heat sources and out of direct sunlight. Store them in their original packaging.
3.If you receive an abrasive disc with damaged packaging, return it to the manufacturer. Don't use the disc.
4. Check coated abrasive discs for damage before use. If you see any nicks, cuts, tears or other visible damage, don't use it.
5. Never use a disc that has curled “sand side in” due to excess humidity. Edges of the disc not in full contact with the backup pad create a hazard when grinding.
Never alter the size or shape of an abrasive disc or its back-up pad.
6. Start up the tool just off the workpiece, and bring it up to full operating speed before you actually begin to grind or sand.
7. As you start to grind or sand, ease the fiber disc onto the workpiece at a 5- to 10-degree angle to the piece's surface.
8. If you're using a see-through disc or one with scooped holes, make sure nothing's protruding through any of the holes before you start up your equipment.

RELATED CASE

• 

  Flower Flap Discs

  LEARN MORE

• 

  Flower Flap Discs

  LEARN MORE

• 

  Flower Flap Discs

  LEARN MORE

• 

  Flower Flap Discs

  LEARN MORE