Non Woven Flap Disc

Non Woven Flap Disc

Specification

Name：Non Woven Flap Disc
Material：Non Woven Material
Backing：Fiberglass Backing
Type：T27, T29
Dia.：100-230mm
Grit：Coarse(Yellow), Medium(Red), Fine(Blue)

Features

strong anti-clogging performance.
5 times longer than a single nylon disc.
Best disc for deburring, edge breaking, blending, cleaning, finishing, and polishing.

Suitable for

Non Woven Flap Disc also known as Surface Conditioning Flap Disc, are final choice for finish polishing&cleaning, rust removal and deburring on stainless steel surface or other metal surface.

LEAVE MESSAGE CHAT ONLINE

 Data download

 Product video

Size		Backing material	Type	Material	Grit No
100x16	4x5/8	Fiberglass,Plastic, Iron	T27,T28, T29	non-woven cloth	Coarse, Medium, Fine
115x22	4-1/2 x 7/8	Fiberglass,Plastic, Iron	T27,T28, T29	non-woven cloth	Coarse, Medium, Fine
125x22	5x5/8	Fiberglass,Plastic, Iron	T27,T28, T29	non-woven cloth	Coarse, Medium, Fine
150x22	6x5/8	Fiberglass,Plastic, Iron	T27,T28, T29	non-woven cloth	Coarse, Medium, Fine
180x22	7x5/8	Fiberglass,Plastic, Iron	T27,T28, T29	non-woven cloth	Coarse, Medium, Fine
Note: High density flaps can be customized.


Non Woven Flap Disc is used when other tools reach their finishing limits or cannot achieve the required result. Different color of the flaps indicates different grits: Brown–coarse, Red–medium, blue–fine.

Non Woven Flap Disc,also known as Surface Conditioning Flap Disc, are final choice for finish polishing & cleaning, rust removal and deburring on stainless steel surface or other metal surface.

Don't grind near flammable materials. Grind and sand in well-ventilated areas whenever possible. Wear eye and face protection when working with any abrasive products. Wear a dust mask or approved respiratory protection. Check the packaging for the materials you're abrading or grinding to see which is recommended.
Wear hearing protection. Pay attention to the noise exposure, and make sure you're protected when it exceeds established threshold levels.
Wear safety gloves. Pay attention to where sparks are flying. Direct sparks away from your body and away from anyone else in the room.
Don't wear loose-fitting clothing while grinding. Wear long-sleeved shirts or arm guards and long pants. If the tool you're working with starts to chatter or vibrate, stop at once. Find the cause of the problem, and fix it before you go any further. Use your abrasives on a first-in, first-out basis. Rotate your stock to keep the oldest abrasives ready at hand.