PVA grinding wheel/Elastic Flap Disc

PVA grinding wheel/Elastic Flap Disc

Specification

Material: Aluminium Oxide/Silicon Carbide/Zirconia Alumina/ Ceramic Grain
Thickness: 10mm
Grit: 60-400#
Outer diameter: 100mm
Inside diameter: 16mm
Specifications: 100*10*16, 4 inch

Features

Bonded with special fiber materials
It has high tensile, impact and flexural strength, high grinding efficiency
Safe and convenient to use
Efficient and economical.

Suitable for

Widely used in cleaning welding seams, solder joints, grinding burrs, flashing edges, and repairing metal surface defects in automobiles, ships, machinery manufacturing, metallurgical chemicals, etc.

2. It is suitable for polishing with the edges, corners and edges of stone, board and wood after cutting;

3. It is especially suitable for repairing surface defects of stainless steel work-pieces and glass ornaments.

LEAVE MESSAGE CHAT ONLINE

 Data download

 Product video

Elastic Flap Disc
Size(mm)	Sizes（inch）	Backing material	Type	Abrasive	Grit No
100x16	4x5/8	Fiberglass,Plastic	T27	A,HA,ZA,CER	36-320
		Note: other sizes can be customized.



Widely used in cleaning welding seams, solder joints, grinding burrs, flashing edges, and repairing metal surface defects in automobiles, ships, machinery manufacturing, metallurgical chemicals, etc


It is suitable for polishing with the edges, corners and edges of stone, board and wood after cutting


It is especially suitable for repairing surface defects of stainless steel work-pieces and glass ornaments.

Don't grind near flammable materials. Grind and sand in well-ventilated areas whenever possible. Wear eye and face protection when working with any abrasive products. Wear a dust mask or approved respiratory protection. Check the packaging for the materials you're abrading or grinding to see which is recommended.
Wear hearing protection. Pay attention to the noise exposure, and make sure you're protected when it exceeds established threshold levels.
Wear safety gloves. Pay attention to where sparks are flying. Direct sparks away from your body and away from anyone else in the room.
Don't wear loose-fitting clothing while grinding. Wear long-sleeved shirts or arm guards and long pants. If the tool you're working with starts to chatter or vibrate, stop at once. Find the cause of the problem, and fix it before you go any further. Use your abrasives on a first-in, first-out basis. Rotate your stock to keep the oldest abrasives ready at hand.