M14 Flap Wheels

M14 Flap Wheels

Specification

Abrasives: Aluminium oxide
Specification : Diam.115-125mm,Thickness 20mm
Backing: Polyester/cotton cloth
Grit Range: 40# 60# 80# 120#
Max RPM: According to standard

Features

Versatile, premium long lasting, stand up to light-to moderate-pressure applications
Superior durability, conformability, and wear resistance

Suitable for

M14 Flap Wheels is better choice for coarse grit deburring, blending, and cleaning of stainless and carbon steel, and aluminum, brass, and bronze

LEAVE MESSAGE CHAT ONLINE

 Data download

 Product video

Specification	Abrasive grain	Grit No.
115x20x M14	Aluminium oxide	40#-320#
125x20x M14	Aluminium oxide	40#-320#



Versatile, premium long lasting, P-graded aluminum oxide abrasive blend and strong resin bond cut cooler and smoother, and stand up to light- to moderate-pressure applications


Heavy cotton/polyester blended flaps provide extended durability, conformability, and superior wear resistance.


Better choice for coarse grit deburring, blending, and cleaning of stainless and carbon steel, and aluminum, brass, and bronze

The first is the protection problem, the protective cover is the main protective device of the polishing machine, its role is, when the flap wheel is damaged in the work, can effectively cover the impeller, to ensure the safety of personnel.
Secondly, the balance of the flap wheel is mainly caused by the manufacture and installation of hundreds of flaps of inaccurate, so that the center of gravity and rotary shaft do not coincide.The harm caused by the imbalance is mainly shown in two aspects, on the one hand, in the high speed rotation of the vane wheel, cause vibration, easy to cause the workpiece surface polyangular vibration marks, on the other hand, the unbalanced acceleration of the spindle vibration and bearing wear, serious will cause the vane wheel page rupture, even cause accidents.
Matching problem.The matching problem mainly refers to the installation problem of chuck and flaps. According to the standard requirements, the diameter of the chuck shall not be less than 1/3 of the diameter of the installed sand disc, and the corresponding provisions wear to the diameter larger than the chuck 10mm should be replaced with a new flap wheel.